Drying silos after cleaning

Dehumidifying storage containers quickly and safely

Before a different type of bulk material can be stored in the same silo (or another storage or transport container) it is cleaned with water. To be able to reuse these containers as soon as possible, we recommend the application of adsorption dryers of the TTR series.

After the cleaning of storage containers and silos you have to count on them to be fully dried for new bulk material to be protected against moisture from the beginning. And since drying can be effected in a quick and economical manner, we advise decision makers from the chemical and pharmaceutical industry to consider our high-performance dryers of the TTR series.

Adsorption dryer TTR 1400 dries every silo

With their two separate air flow ducts (TTR Trisorp Dual principle of operation) all adsorption dryers of this series are characterized by a particularly simple adjustability. Furthermore, with the internal heat recovery as well as the high level of resilience and performance of the special rotors they rank among the most economical adsorption dryers of their kind. The TTR series comprises both stationary and mobile adsorption dryers. Particularly a mobile version of the TTR 1400 with transport frame is optimally suited for the dehumidification of silos in the chemical and pharmaceutical industry. This powerful adsorption dryer impresses with a dehumidification performance of approx. 177 kg in 24 hours at 20 °C and a relative humidity of 60 per cent. It dehumidifies an air volume of up to 1,800 m³/h. It is also available as stainless steel version.

Fan hoses and measurement technology to complement the system

To match this high-performance adsorption dryer, the air transport hoses should also be designed for full-scale industrial usage. Trust the brand quality of high-class, spiral-reinforced fan hoses of the Tronect^{^®} series.
Several hand-held measuring devices such as thermohygrometers and data loggers like the innovative DL200X complete the dehumidification concept in the silo and so enable constant monitoring of the drying process.

Further solutions

Chemical industry

Agriculture

Food industry

Pharmaceutical industry

Make use of our best practice industrial services

Since every industrial undertaking has characteristic process flows, installations and facilities, every air treatment solution demands case-specific device configurations. All in all, the combined effects of air currents, humidity conditions and temperature fluctuations are often hard to calculate on a purely theoretical basis, e.g. in airlock areas or on conveying paths. The consequence: Unnecessary additional costs due to an overestimated demand or – even worse – solutions not working sufficiently in real life.

You can count on our experts

In order to precisely calculate the demand in the industry and to develop tailor-made concepts for climate conditioning experienced climate specialists are needed. Rely on our team of experts as well as the industrial services: We analyse the individual requirement situation with you present on site, determine the specific demand for devices and develop a tailor-made project solution right up to the exact positioning of the devices.

Just give us a call at +49 2452 962-777 – our industry consultants will be pleased to help you personally and provide information regarding our best practice industrial services. Or send a request indicating your personal requirements directly to our industry experts. We will answer promptly!

You need special desiccant dehumidifier models?

Upon request, we also produce customized desiccant dehumidifiers as special models

Upon request, we will readily produce tailor-made desiccant dehumidifiers as special models “made in Germany” perfectly geared to your needs, e.g.:

TTR industrial desiccant dehumidifiers with hygienic design
TTR industrial desiccant dehumidifiers for PWIS-free dry air
TTR industrial desiccant dehumidifiers with extremely low dew point

Makes use of the possibility of having special models with tailored components for your individual needs planned, designed and manufactured in close consultation with our specialists.
Click here to find out more ...

Drying after silo cleaning

standard equipment

optionally available

not available

Further application examples for air dehumidification

Environmental simulation climate chamber

In climatic chambers and wind tunnels three factors need to be simulated at the best possible rate: air temperature, wind strength and humidity. For the latter, the automotive industry needs dehumidifiers, which also perform well at dew points below 0°C, as well as high-performance desiccant dehumidifiers.
Additional information
Dehumidifying & air cleaning for coating

There are three parameters to be controlled when coating car components: room temperature, humidity and the dust content in the air. In addition to dehumidifiers and heating devices we also provide sustainable air cleaners with special volumetric flow regulation for this production stage in the automotive industry.
Additional information
Dehumidification in tents

When preparing a tent or another type of temporary accommodation, good room conditions are essential. This applies particularly to makeshift dwellings accommodating large numbers of people. This can be tent cities or container villages for asylum seekers, tent camps for youth groups, tents used as a place to sleep at large events, and also containers serving as a temporary home for seasonal...
Additional information
Drying hygroscopic bulk material

Varying and too high humidity values can ruin the pourability of powders and granules – and thus entail high consequential costs. In order for hygroscopic bulk material not to go lumpy nor to block hauling paths, the entire air in the chemical and pharmaceutical production must be pre-dried. Using adsorption dryers of the TTR series that's no problem.
Additional information
Drying pellets

Who turns his back on proper air conditioning for production and storage facilities risks serious damage to the product. This is also true for the manufacturing of pellets. The biofuel is particularly susceptible to excessive humidity values. For the untreated raw wood withdraws the humidity from the air and absorbs it. With devastating consequences for both the customer and the manufacturer:...
Additional information
Dehumidification in hotels

A suitable room climate is a prerequisite for the well-being of hotel guests. If the air in the room is too warm or humid, it appears to be stale and muggy. Often damages appear at the building structure and interior within a short period of time. Wallpaper will be dotted with mould stains, curtains and clothes as well as linen become damp and musty and – if it comes to the worst – mildew runs...
Additional information
Dehumidification in indoor ice-skating rinks

Due to the difference in temperature between air and the icy surface, condensation inevitably forms in every ice rink – especially when humid air keeps flowing in from outside through the refrigeration system. The solution against dripping water on the ice and against damage to property constitutes a dehumidifier. It prevents condensation in the offing.
Additional information
Drying compressed air

The most frequent causes for a production stop are too much water vapour in the machines and installations, and corrosion inside the pipelines. Therefore, too humid compressed air should be avoided by all means. An effective option is the use of high-performance dehumidifiers. The answer to the question of how dry the compressed air has to be in order to guarantee optimum production conditions and...
Additional information
Mobile devices for sanitary, heating and ventilation engineers

Many sanitary, heating and ventilation engineers use the mobile devices from the Trotec Group. Here sanitary, heating and ventilation engineers find everything they regularly need for their daily business to bridge the downtimes of stationary installations – all from a single source: mobile heating devices and central heating units, mobile air handling units or cooling systems right down to...
Additional information
Dehumidification after restoration work

With an extensive reconstruction flats and houses are being polished up so as to quickly attract potential buyers. Estate agents rely on this service for a better marketability. But home builders also very much appreciate it when their own four walls are in immaculate condition before they move in. The future inhabitants’ thrill of anticipation increases along with the progress in construction...
Additional information
Dehumidification in cinema halls

A cinema audience essentially wants one thing: to unwind and get away from the daily routine by succumbing to a world of fiction. Loud voices and unwelcome sources of light can be just as annoying as an inappropriately tempered auditorium and a poor air quality. Precisely because it is difficult to properly ventilate cinema facilities, they are usually equipped with powerful air-conditioning...
Additional information
Humidity regulation in gas distribution stations

The consequences of condensation water and high humidity levels in gas distribution stations are well-known – and expensive: corrosion of pipes, stairways and other metal parts as well as moisture-related failures of the control electronics may entail incalculable costs. If you want to prevent this from the outset, investing in a professional dehumidification system pays off.
Additional information
Humidity regulation in gas turbine power stations

Gas turbine power stations significantly contribute to the coverage of short-term peak loads. A sophisticated humidity regulation helps to prevent the breakdown of individual gas turbines due to corrosion and problems with the electronics.
Additional information
Offshore: Preventing corrosion

Corrosion of metal parts in the nacelle of a wind turbine or in the tower itself as well as electrical failure are among the most typical humidity damages in offshore surroundings. They cause substantial additional costs as they increase the expense for maintenance and repair and may lead to operational downtimes. Plus, they reduce the turbine's life. In this case, strategically positioned...
Additional information
Dehumidification in bridges

Inside bridges, steal beams, electric lines and technical rooms are subject to high humidity. For decades, it has now proven an efficient alternative to high-maintenance anti-rust paint to instead use dehumidifiers to keep bridges dry on the inside. Trotec desiccant dehumidifier of different capacities are used for dehumidification.
Additional information
Humidity regulation in the field of battery production

Extremely low humidity values, or in other words, an extremely low dew point are indispensable for the production of innovative and environmentally friendly batteries, so as to achieve an optimum product yield and product quality and furthermore ensure a long service life taking all required safety precautions into consideration. Practice-proven dehumidification solutions from Trotec protect...
Additional information

Trotec products for the pharmaceutical industry

standard equipment

optionally available

not available

Application examples for the pharmaceutical industry

Air conditioning industrial processes

Concepts with stationary or mobile dehumidification are frequently used for the process air conditioning in the industry. Often drier air is required locally in machines, plants or individual operating processes – a constant supply regardless of the surrounding conditions. For this purpose, the Trotec Group provides powerful adsorption dryers for industrial customers.
Additional information
Dehumidification when filling & packing

The humidity level during filling and packing in the chemical and pharmaceutical production must be precisely controlled. After all, the damage would be immense should hygroscopic products go lumpy, start to stick or their shelf life decrease. Using our adsorption dryers, process air conditioning is no problem.
Additional information
Dehumidifying & air cleaning in storages

The Trotec Group provides different dehumidification solutions – from the condensation dehumidifiers of the DH series to the adsorption dryers of the TTR series. Both are available as mobile and stationary versions. We offer the right dehumidification technology for every depot or dispatch warehouse. Innovative measuring devices and data loggers complete the dehumidification concept for storage...
Additional information
Drying compressed air

The most frequent causes for a production stop are too much water vapour in the machines and installations, and corrosion inside the pipelines. Therefore, too humid compressed air should be avoided by all means. An effective option is the use of high-performance dehumidifiers. The answer to the question of how dry the compressed air has to be in order to guarantee optimum production conditions and...
Additional information
Drying hygroscopic bulk material

Varying and too high humidity values can ruin the pourability of powders and granules – and thus entail high consequential costs. In order for hygroscopic bulk material not to go lumpy nor to block hauling paths, the entire air in the chemical and pharmaceutical production must be pre-dried. Using adsorption dryers of the TTR series that's no problem.
Additional information
Drying after silo cleaning

After the cleaning of storage containers and silos you have to count on them to be fully dried for new bulk material to be protected against moisture from the beginning. And since drying can be effected in a quick and economical manner, we advise decision makers from the chemical and pharmaceutical industry to consider our high-performance dryers of the TTR series.
Additional information
Medical practices and authorities germ and virus-free thanks to ozone

Who doesn’t know this: In the often overcrowded waiting areas at the doctor's office or, for example, at the residents' registration office, people sit close together and it is not uncommon to be sneezed at or coughed on. But even when there is no direct interpersonal contact, they are there: pathogenic viruses, germs, bacteria and spores. Particularly in family doctor's offices, which are...
Additional information
Germ and virus-free shopping in supermarkets, drugstores and pharmacies

Seasonal flu epidemics, moulds and bacterial pathogens present supermarkets, pharmacies and drugstores with a number of challenges. Day after day, hundreds of hands reach for a shopping cart or basket, pick up goods for inspection and make cashless payments at the POS cash system.
Additional information
Healthy and virus-free breathing air in retirement and nursing homes

A scratchy throat, itchy eyes, irritated mucous membranes, fatigue, chapped skin – all these are typical signs that something is not right with the ambient air. This is because the blame for this often lies in an overly dry room climate. These and additional symptoms increasingly occur during the heating season in particular – as do flu-like infections and colds, which are literally spread as...
Additional information